| Author | Post |
|---|
rodeo1968
Member
| Joined: | Wednesday November 14th, 2007 |
| Location: | |
| Posts: | 81 |
|
Posted: Friday March 14th, 2008 08:41 pm |
|
| Does anyone know if it is possible to change a Final Drive pinion in a remote box after removing the diff but without splitting engine and gearbox?
|
Andrew1967
MCR Member
|
Posted: Friday March 14th, 2008 09:20 pm |
|
I took one out of a rod change engine/box a couple of weeks ago that was still complete but only to save the pinion before the lump went for scrap.
It's a case of taking the end cover off, locking it into two gears to lock the mainshaft, bending back the locktab and undoing the mainshaft nut. The diff was out as well.
|
rodeo1968
Member
| Joined: | Wednesday November 14th, 2007 |
| Location: | |
| Posts: | 81 |
|
Posted: Friday March 14th, 2008 09:34 pm |
|
| I don't know whether you can lock the gears with a remote gearbox.
|
Andrew1967
MCR Member
|
Posted: Friday March 14th, 2008 09:41 pm |
|
| If you take out the change speed gate then you should be able to engage two gears at once by manually moving the selector shafts.
|
rodeo1968
Member
| Joined: | Wednesday November 14th, 2007 |
| Location: | |
| Posts: | 81 |
|
Posted: Friday March 14th, 2008 09:43 pm |
|
| Thanks for that.
|
Current time is 12:57 am | |
|
